Numerical, Experimental Analysis And Result Validation Of Parabolic Cooker Solar Collector:- Anoka Princewill C

ABSTRACT

 Numerical and experimental approach is applied to study the performance of parabolic cooker solar collector (PCSC). The proposed model consists of three parts. The first partis a solar radiation part. In this section, the amount of solar radiation incident upon Earth is estimated using equations and relationships between the sun and the Earth. The second part is the optical part. This part has the ability to determine the opticalefficiency of PCSC throughout the daytime. The last part is the thermal part. The aim cfthis section is to estimate the amount of energy collected by the working fluid, heat loss, thermal efficiency, and outlet temperature. All heat balance equations and heat transfer mechanisms: conduction, convection, and radiation, have been incorporated. The proposed model is implemented in MATLAB software. In addition, an experimental investigation was conducted on parabolic cooker solar collector. The test was carried out at Federal university ofTechnology, Owerri on October 19, 2023. A test rack was used during the experimentation. It contains a circulating pump, a storage tank, a heat exchanger (radiator), and flow meter. Thermocouples were used to measure the inlet and outlet temperature of PCSC. Water is used as a working fluid. After data were recorded, thermal performance analysis was performed. The results indicate that a maximum temperature of 48 was achieved and a maximum efficiency of 30 % was obtained. Lastly, comparisons between the experimental and modelled results have been carried out for validation purpose. The results show acceptable agreement even though there are some variances. This deviation is accounted for in the heat loss from the connectors, supporting brackets, location of thermocouples, accuracy of thermocouples andthermocouple reader, and accuracy ofheat transfer equations.